基于简易的平均切削力模型的进给速度优化程序  

Feed Rate Optimization Program Based on the Simple Average Cutting Force Model

作　　者：郑喜朝[1] 

机构地区：[1]陕西国防工业职业技术学院,户县710302

出　　处：《价值工程》2011年第10期28-28,共1页Value Engineering

摘　　要：主轴转速、进给速度、切削深度、加工行距与切削力都成正比关系,刀具的悬长、硬度,工件的硬度等由于切削过程的复杂性,它们并不成线性或有规律的关系。这就需要海量的实验数据来建立起铣削力模型,这就需要耗费大量的物力和人力。The spindle speed,feed rate,cutting depth,and process spacing are directly proportional to the cutting force.The overhang length and hardness of the tool,hardness of the workpiece have not linear or regular relationship for their complexity in the cutting process.This requires vast amounts of experimental data to establish a cutting force model,and requires a lot of material and human resources.

关 键 词：平均削力模型 切削力数据 

分 类 号：TG54[金属学及工艺—金属切削加工及机床]