不锈钢表面Cr-Pd合金电沉积及镀层在强还原性介质中的耐蚀性  

ELECTROPLATING OF Cr-Pd ALLOY ON 316L STAINLESS STEEL AND ITS CORROSION RESISFANCE IN THE STRONG REDUCING MEDIUMS

作　　者：徐亮[1] 唐鋆磊[1] 左禹[1] 

机构地区：[1]北京化工大学材料科学与工程学院,北京100029

出　　处：《金属学报》2011年第2期209-213,共5页Acta Metallurgica Sinica

摘　　要：通过选择络合剂、缓冲剂及采用方波脉冲电流和优化电镀工艺,在酸性镀液中实现了Cr-Pd共镀,并在不锈钢表面制备出均匀致密且与基体结合良好的Cr-Pd合金镀层.通过改变镀液中铬盐和钯盐的相对含量,可以大范围改变镀层成分.Cr-Pd合金镀层可显著提高不锈钢在高温还原性腐蚀介质中的耐蚀性,在沸腾的20%(质量分数)H_2SO_4溶液中,Cr-Pd合金镀层使316L不锈钢的腐蚀速率降低了4个数量级以上.镀层中的Cr和Pd对致钝具有协同促进作用,当镀层中含有2.5%Pd(质量分数)时即具有明显的促进钝化效果,含33.3%Pd镀层对不锈钢的保护效果与纯Pd镀层相当.By selecting complexing agent and the buffer agent, using square wave pulsed currents and optimizing electroplating process, the chromium-palladium alloy films were deposited on 316L stainless steel in acidic solution. By appropriate design for the plating bath composition and pulse electroplating, Cr-Pd alloy films were deposited on 316L stainless steel. The films were compact and homogeneous with good adherence to the substrate. By adjusting the composition of the plating bath, the ratio of Cr/Pd could be changed in a large range. The Cr-Pd films significantly improved corrosion resistance of 316L stainless steel in strong reducing mediums. In boiling 20% （mass fraction） H2SO4 solution, corrosion rates of the Cr-Pd plated samples were about four orders of magnitude lower than that of the original 316L stainless steel samples. A synergism effect was observed for Cr and Pd on passivation of stainless steel. When there was only 2.5%Pd （mass fraction） in the Cr-Pd film, corrosion resistance of the sample was obviously improved. The protection effect of Cr 33.3%Pd film was similar to that of pure Pd film on stainless steel.

关 键 词：Cr-Pd合金镀层 不锈钢 电镀 耐蚀性 钝化 

分 类 号：TF777.1[冶金工程—钢铁冶金]