检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:黄文忠[1] 蔡娟娟[1,2] 温贤伦[1] 洪伟[1] 谷渝秋[1] 郑志坚[1] 何颖龄[1]
机构地区:[1]中国工程物理研究院激光聚变研究中心,四川绵阳621900 [2]中国科技大学近代物理系,基础等离子体物理重点实验室,合肥230026
出 处:《强激光与粒子束》2011年第3期689-692,共4页High Power Laser and Particle Beams
基 金:supported by the Foundation of National Laboratory of Laser Fusion (9140C6802020602)
摘 要:用无色散X射线谱仪分别在靶前后测量了飞秒激光辐照铜箔产生的KαX射线,获得了能量转换效率。入射激光脉冲宽度33 fs,能量在50 mJ^5 J,强度1017~1019W/cm2。靶后发射的KαX射线强度随入射激光能量的增加而增加,其单色性较靶前好。采用100μm厚靶,其能量转换率为2.2×10-5。The Kα X-ray emission from femtosecond laser-material interactions has been measured with a dispersionless Kα X-ray spectrometer in front of and behind the Cu foil targets.The conversion efficiency from laser energy to Kα photons was obtained.Laser pulse width was typically 33 fs and intensity was kept within the range of 1017 W/cm2 to 1019 W/cm2 by changing laser energy from 50 mJ to 5 J.The experimental results show that the intensity of the Kα X-ray increases with the laser energy,and the X-ray background behind the target is better than that in front of the target.With a 100 μm-thick foil,the conversion efficiency is 2.2×10-5.
关 键 词:等离子体物理 激光-等离子体相互作用 飞秒激光 X射线发射
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222