检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]电子科技大学通信与信息工程学院射频集成电路研究室,四川成都611731
出 处:《电视技术》2011年第7期36-40,共5页Video Engineering
基 金:省部产学研结合项目(2009A090100019)
摘 要:提出了0.13μmCMOS工艺下可兼容多标准DVB—H/DAB/CMMB的移动数字电视调谐器射频前端双通道LNA设计。在UHF频段和L波段下,设计分别采用片上balun电路、双交叉耦合技术、开关转换电路、伪差分电路等技术以达到LNA宽带匹配、可变增益、低NF及高线性度的指标要求。版图后仿真结果显示:在UHF频段,仿真频率范围为470~860MHz,LNA增益范围为14.7~38.8dB,NF〈2.4dB,IIP3=1.979dBm;在L波段,仿真频率范围为1.4~1.8GHz,LNA增益范围为13~38.5dB,NF〈2.7dB,11P3=3.605dBm。该设计较好地实现了多标准下LNA宽带可变增益性能。In this paper, two sets of LNA in the frequency range of UHF and L-band implemented in 0.13 μm CMOS technology are presented to support the digital TV standards DVB-H/DAB/CMMB. To meet the needs of digital TV application, the on-chip balun circuit, controllable resistors, DCC technology and FDA amplifier are adopted to achieve the good performance on input-match, variable gain, NF and linearity. Post-simulations show that in the frequency range of 470- 860 MHz, the LNA achieves maximum gain 38.8 dB, lowest gain 14.7 dB, noise figure lower than 2.4 dB and IIP3 1.979 dBm, while in the frequency range of 1.4-1.8 GHz, the LNA achieves maximum gain 38.5 dB, lowest gain 13 dB, noise figure lower than 2.7 dB and IIP3 3.605 dBm.
分 类 号:TN46[电子电信—微电子学与固体电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15