基于UG二次开发的刮板输送机选型计算  

Selection and Calculation of Scraper Conveyor Based on Further Development of UG Software

作　　者：郎建伟[1] 杨兆建[1] 王学文[1] 

机构地区：[1]太原理工大学机械工程学院,太原030024

出　　处：《煤矿机械》2011年第3期18-20,共3页Coal Mine Machinery

基　　金：国家11.5支撑计划重点课题资助(2007BAB13B01-02)

摘　　要：介绍了在UG软件中快速实现刮板输送机选型计算的方法,在VC++6.0的集成编译环境下,利用UG/Open Menuscript、UG/Open UIStyler、UG/Open API等二次开发工具,实现了在UG软件平台下将刮板输送机选型设计程序化,并开发出选型设计系统。通过输入刮板输送机选型所需的参数,可快速实现刮板输送机的选型计算,从而大大提高刮板机设计效率。A method of calculation which can select the type of scraper conveyor quickly in UG software was introduced. Under the integral programming environment of VC ＋＋6.0, with the second development tools of UG/Open Menuscript, UG/Open UIStyler, UG/Open API, achieved the program of selection and calculation of scrape conveyor on the platform of UG and the system for selecting and designing scraper conveyor was developed. Input the necessary parameters, quickly selecting the type of scraper conveyor can be realized, and greatly raised the design efficiency.

关 键 词：UG 开发工具 刮板输送机 选型计算 

分 类 号：TD528[矿业工程—矿山机电]