自起动永磁电机最小转矩的时步有限元计算  

Calculation of line-start permanent magnet motor minimal torque based on time-stepping finite element method

作　　者：张健[1] 罗应立[1] 陈伟华[2] 姚丙雷[2] 

机构地区：[1]华北电力大学电气与电子工程学院,北京102206 [2]上海电器科学研究所(集团)有限公司,上海200063

出　　处：《电机与控制学报》2011年第3期80-85,共6页Electric Machines and Control

基　　金：国家科技支撑计划项目(2008BAF34B02);国家自然科学基金(50777018)

摘　　要：考虑到起动过程中饱和、谐波及随转速变化的挤流效应等因素对转矩曲线的影响,研究如何从瞬态转矩曲线获取最小转矩数值。首先采用场-路-运动耦合的时步有限元方法得到起动过程的瞬态转矩转速曲线,为了从所获得的转矩随时间以及随转速变化呈现出急剧波动的曲线获得最小转矩的数值,提出了新的数据处理方法,使用该方法经过一次计算即可得最小转矩数值。最后研究了不同计算条件对最小转矩的影响。本文提出的方法不仅可以用于计算永磁电机的最小转矩,也可以为最小转矩的测试提供参考。This paper discusses how to obtain the minimal torque value of line-start permanent magnet synchronous motor（LSPMSM） starting process considering the saturation,harmonic and skin effect on the impact of torque curve.Firstly the starting process speed-torque curve was obtained using field-circle-motion coupled time-stepping finite element method.In order to obtain the minimal torque value from rapidly fluctuating curves which torque versus speed or time,this paper presented a novel data processing method,using which it can get the minimal torque with calculating a starting process only once.Finally,this paper studied the different calculation conditions on the effects of the minimal torque.The proposed method in this paper can be applied to the minimum torque value calculation of the permanent magnet motor,and it also can be used as a reference for the minimum torque test.

关 键 词：自起动永磁电机 最小转矩 平均转矩 时步有限元 数据处理 

分 类 号：TM351[电气工程—电机]