烧结工序能量平衡及节能诊断分析  

Energy Balance and Energy-Saving Diagnosis in Sintering Process

作　　者：赵斌[1,2] 张志远[3] 冯俊小[3] 张玉柱[1] 梁海鹰[4] 

机构地区：[1]河北理工大学河北省现代冶金技术重点实验室,河北唐山063009 [2]华北电力大学电站设备状态监测与控制教育部重点实验室,北京102206 [3]北京科技大学机械工程学院,北京100083 [4]唐山钢铁股份有限公司炼铁厂,河北唐山063000

出　　处：《钢铁》2011年第3期83-86,共4页Iron and Steel

基　　金：国家科技支撑计划资助项目(2008BAE67B01)

摘　　要：为解决烧结工序能耗高的问题,根据能量守恒原理,对唐钢炼铁厂烧结机和环冷机进行了详细的能量平衡测试,通过对测试结果的分析,并结合生产设备及工艺特点,分析诊断了烧结工序的能源消耗状况。测试结果表明:烧结机排烟温度偏高,热损失较大,环冷机烟罩内串风严重、台车底部漏风较大。根据测试结果提出具体的改进措施。测试的原始数据为炼铁厂烧结工序的节能降耗提供重要的参考依据。To solve the problem of high energy consumption of sintering process,according to the energy conservation principle,the thermal measurements were operated toward sintering machine and circular cooler of iron making plant of Tangshan Iron and Steel Co.Through analysis of test results,combined with production equipment,technology and operational features,the utilization situation of thermal energy was analyzed and diagnosed.The results show that the temperature of exhaust gas from sintering machine is higher than normal,heat loss is greater,the flow of air is more serious between the hoods,and air leakage at the bottom of the pallet car is higher.According to the diagnosis,efficient waste heat recovery-utilization and other specific measures and ways of reducing power consumption were put forward to provide reliable basis for further improvement of the technology and equipment.

关 键 词：烧结机 环冷机 能量平衡 节能诊断 

分 类 号：TF046.4[冶金工程—冶金物理化学]