液态铅铋实验平台无窗靶水力学原理验证实验段设计研究  

Design studies of hydraulic verification test section of windowless target of liquid lead-bismuth eutectic experimental platform

作　　者：祝玲琳[1,2] 柏云清[1,2] 陈钊[2] 何梅生[1,2] 盛美玲[2] 姚曦[2] 汪卫华[1,2] 高胜[1,2] 陈红丽[1,2] 黄群英[1,2] 吴宜灿[1,2] FDS团队 

机构地区：[1]中国科学院等离子体物理研究所,安徽合肥230031 [2]中国科学技术大学核科学技术学院,安徽合肥230027

出　　处：《核科学与工程》2010年第4期333-337,共5页Nuclear Science and Engineering

基　　金：国家"973"计划项目;中科院知识创新工程重要方向项目(KJCX2-YW-N37)

摘　　要：液态铅铋合金无窗靶作为加速器驱动次临界系统(ADS)的核心部件之一,其主要技术难点之一在于液态合金自由液面的形成和控制,需要通过理论分析和实验验证。FDS团队正在开展ADS反应堆概念和液态铅铋堆芯综合模拟实验平台的设计和研制工作,无窗靶热工水力学原理验证实验段是综合实验平台中的重要组成部分。本文给出了无窗靶水力学原理验证实验段的设计目标和初步参数,对主要部件及实验方案进行了设计研究。As one of the key components of the accelerator driven system（ADS）,the formation and control of the free surface is one of the key issues in the design of the windowless target which needs the theoretical analysis and experimental verification.FDS team is launching the conceptual design of ADS reactor and is developing the integrative experimental platform of liquid lead-bismuth eutectic technology.The hydraulicverification facility for windowless spallation target is an important part of the platform.In this paper,the aim of the design and major parameters of the facility were described,and the major components and experimental schemes were presented.

关 键 词：ADS 无窗靶 液态铅铋合金 实验回路 

分 类 号：TL32[核科学技术—核技术及应用]