连续重整烧炭区工艺过程数学模拟程序包的建立和应用(2)  

Establishment and application of process simulation program package for coke burning zone in continuous catalytic reforming regenerator(2)

作　　者：熊献金[1] 徐又春[1] 

机构地区：[1]中国石化集团洛阳石油化工工程公司,河南省洛阳市471003

出　　处：《炼油技术与工程》2011年第3期60-64,共5页Petroleum Refinery Engineering

摘　　要：中国石化集团洛阳石油化工工程公司(LPEC)再生器烧炭工艺过程数学模拟程序模拟计算了国产C厂连续重整装置LPEC再生器的14种不同工况下的烧炭工艺过程。研究了烟气氧浓度、循环量和待生催化剂碳含量等各种操作参数对LPEC国产再生器烧炭区操作状况的影响。模拟结果在装置现场的应用证明,该程序可用于指导再生器的操作和设计。The coke burning process in continuous catalytic reformer regenerator of Refinery C was simulated for 14 different cases with LPEC＇ s process simulation program package for coke burning zone in LPEC regenerator of continuous catalytic reforming. The impacts of operating parameters such as oxygen concentra- tion of flue gas, catalyst circulation rate and coke on spent catalyst, etc on the operation of coke burning zone of LPEC regenerator were studied. The application of simulation results in commercial process units demonstrate that this simulation program can be applied in planning the operation and design of regenerator.

关 键 词：连续重整 再生器 烧炭区 动态模拟 程序包 工业应用 

分 类 号：TE966[石油与天然气工程—石油机械设备]