利用单负材料设计全向滤波器  

Design of Omnidirectional Filter Using Single-Negative Materials

作　　者：陈宪锋[1] 张辉霞[1] 王光[1] 沈小明[1] 

机构地区：[1]常州大学数理学院,江苏常州213164

出　　处：《中国激光》2011年第4期166-170,共5页Chinese Journal of Lasers

基　　金：江苏工业学院科技计划项目(JS200802)资助课题

摘　　要：基于法布里-珀罗腔理论,研究了由2块相同单负材料作为反射镜构成微腔结构的共振特性。若反射镜是负ε材料,在一定条件下可实现TM腔模的全向透射;若是负μ材料,则可实现TE腔模的全向透射。随着入射角的增大,全向透射谱变窄,品质因子提高。腔中介质折射率的提高,可有效缩短TM全向透射微腔结构的尺寸,但对TE全向透射微腔结构尺寸的调制就稍弱。单负材料损耗的存在,不会破坏两种微腔结构的全向共振特性,但随着入射角的增大腔模的透射率有所降低。通过优化处理给出了这两种微腔结构能实现全向透射时所需满足的各种条件,为全向滤波器的设计提供理论指导。Based on the theory of Fabry-Perot cavity,the resonant characteristics of microcavity structure are studied,which is formed by reflectors composed of two slabs of the same single-negative materials.If the reflectors are composed of ε-negative（ENG） material,the omnidirectional transmission of TM mode can be realized under certain conditions;for the case of μ-negative（MNG） material,the omnidirectional transmission of TE mode can be realized.The omnidirectional transmission spectrum narrows and quality factor increases with the increase of incident angle.The increase of the refractive index of material in cavity effectively reduces the size of microcavity structure for omnidirectional transmission of TM mode,but the modulation is less obvious for that of TE mode.The existence of single-negative material loss does not break the characteristics of omnidirectional resonance of two microcavity structures,but the transmissivity of resonant mode reduces with the incident angle.Through optimized processing,the conditions are found for these two types of microcavities to realize the omnidirectional transmission,which provides useful theoretical guidance to the design of omnidirectional filters.

关 键 词：光学器件 全向滤波器 法布里-珀罗腔 单负材料 偏振 

分 类 号：O436[机械工程—光学工程]