检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]东北大学材料电磁过程研究教育部重点实验室,辽宁沈阳110819 [2]东北大学材料与冶金学院,辽宁沈阳110819 [3]东北大学冶金技术研究所有限公司,辽宁沈阳110819
出 处:《东北大学学报(自然科学版)》2011年第4期537-540,553,共5页Journal of Northeastern University(Natural Science)
基 金:教育部留学回国人员科研启动基金资助项目(20071108-2);辽宁省科学技术计划项目(2009221007);中央高校基本科研业务费专项资金资助项目(N100409007);东北大学留学归国博士启动基金资助项目
摘 要:为了解决经典组合方法处理多流中间包停留时间分布(RTD)曲线过程中出现的负死区体积分率问题,利用总体分析法对多流中间包各流的RTD曲线进行合成预处理,得到特征RTD曲线.然后利用经典组合方法处理特征RTD曲线,获得评价多流中间包流体流动的整体评价参数.非对称两流中间包水模型实验结果表明,Sahai修正方法仍会出现负死区体积分率现象;各流的流体平均停留时间是评价多流中间包各流一致性的特征参数;各流流体平均停留时间的最小值是评价多流中间包流体流动特性的关键参数.If a classic combined approach is used to analyze the residue time distribution (RTD) curve in a tundish,the volume ratio of the dead zone in the multi-strand tundish sometimes is negative.In addressing this problem,a comprehensive analytical approach was used to pre-treat the RTD curve of each strand in the multi-strand tundish to get the characteristic RTD curve,and then a classic combined approach was used to treat the characteristic RTD curve,with the whole characteristic parameters obtained to determine fluid flow in the multi-strand tundish.The water model result for the RTD curve of an asymmetrical two-strand tundish showed that the negative volume ratio of the dead zone appeared with Sahai's revised approach.Mean residence time is the key parameter to estimate the similarity of flow characteristics of each strand in the multi-strand tundish.The minimum mean residence time for each strand is the key parameter to investigate the fluid flow in the multi-strand tundish.
关 键 词:中间包 总体分析法 预处理 特征停留时间分布曲线
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.191.238.220