主动式相变储热装置蓄/放热特性实验  

Heat Storage/Release Characteristics of an Active Phase-change Thermal Storage Device

作　　者：张泠[1] 徐敏[1] 刘忠兵 张晓洁[1] 

机构地区：[1]湖南大学土木工程学院,长沙410082 [2]中国五环工程有限公司,武汉430079

出　　处：《科技导报》2011年第11期17-20,共4页Science & Technology Review

基　　金：国家高技术研究发展计划(863计划)项目(2006AA05Z229);湖南省科技厅国际科技合作研发计划项目(06wk3023);湖南省科技计划项目(2010WK3036)

摘　　要：针对一种主动式热电热泵相变蓄热装置,在不同工作电压和不同热源温度下测试其蓄热和放热性能。实验结果表明,在不同工作电压和不同热源温度时,该装置的蓄/放热时间以及蓄/放热效率有很大差异。在工作电压较高,余热热源温度较高的情况下,该装置蓄热所需时间较短;此时继续增加工作电压会导致半导体芯片冷热端温差变大而降低该装置的制热系数。对比被动式相变蓄热装置,该装置最大的优越性在于工作电压的可调性,在合理的范围内调整工作电压大小,可以保证其较高的蓄/放热性能,同时克服了被动式相变蓄热装置在低温余热回收过程中无法改善热能供需双方在时间、地点和强度上不匹配性的缺点。In this paper,the heat storage and release properties of an active phase-change thermal storage device have been tested under different working voltage and exhaust heat temperature.The experimental results show that： different working voltage and exhaust heat temperature make great difference on the time and efficiency of thermal storage/release.Under higher voltage and exhaust heat temperature,the time that the device needs to store heat is short.The increased working voltage can enlarge the temperature difference between the hot and cold sides of semiconductor chips,and then reduce the heating coefficient.Compared to passive phase-change thermal storage devices,the biggest advantage of the device is the adjustability of working voltage.Therefore,much higher heat storage/release properties can be assured by adjusting working voltage within a reasonable range.At the same time,the device overcame the mismatch of thermal energy supply and demand sides on time,place and intensity in the process of recycling low-temperature waste heat,which cannot be improved by passive phase-change thermal storage devices.

关 键 词：相变蓄热 热电热泵 主动蓄热 

分 类 号：TB34[一般工业技术—材料科学与工程]