原位聚合PA11/POE-g-MAH共混材料的流变性能  

Investigation on the Rheological Behaviour of PA11/POE-g-MAH Blends Preparedby In-situ Melt Polymerization

作　　者：李驰[1] 陈春银[1] 王标兵[1] 

机构地区：[1]中北大学理学院,山西太原030051

出　　处：《塑料》2011年第2期92-94,32,共4页Plastics

基　　金：山西省科技攻关项目(20100321081)

摘　　要：通过原位熔融聚合的方法合成了聚酰胺11(尼龙11)/马来酸酐化乙烯-辛烯共聚物(POE-g-MAH)共混材料,采用XLY-Ⅱ型毛细管流变仪研究共混物的流变特性。结果表明:PA11及其共混物融体均为假塑性流体,在200～230℃下的非牛顿指数n为0.538～0.775。随着POE-g-MAH含量的增加,表观黏度趋于增加。POE-g-MAH的加入导致体系的黏流活化能下降,表明共混材料的表观黏度对温度的敏感性降低,易于加工成型。Polyamide 11 （ PAl 1 ）/maleated poly （ethylene-octene） （POE-g-MAH） blends were prepared by in-situ melt polymerization. The rheological behaviours of PAll/POE blends were investigated using XLY- II rheometer. The results showed that PAl 1 and its blends displayed pseudo plastic fluid. The non-Newtonian indexes were in the range of 0. 538～ 0. 775 with the variation of temperature from 200 ~C to 230 ~C. The apparent viscosity of the blends increased with the increasing POE-g- MAH loading level. The apparent viscous activation energy of the blends tended to reduce as comparison with the pure PAl 1 , which indicating that the apparent viscosity of blends was less sensitive to temperature and is ready to be processed.

关 键 词：聚酰胺11 马来酸酐化乙烯 辛烯共聚物 原位融体聚合 表观黏度 流变行为 

分 类 号：TQ342.1[化学工程—化纤工业]