混凝+厌氧+好氧组合工艺处理油墨废水的工程实例  

AN ENGINEERING EXAMPLE OF TREATING PRINTING INK WASTEWATER BY COAGULATION+ANAEROBIC+AEROBIC COMBINED PROCESS

作　　者：朱乐辉[1] 余保财[1] 张玉[1] 邱俊 裴浩言[1] 

机构地区：[1]南昌大学环境与化学工程学院,南昌330031 [2]江西省畜牧技术推广站,南昌330046

出　　处：《环境工程》2011年第2期51-54,共4页Environmental Engineering

摘　　要：采用混凝沉淀+水解酸化池+BIOFOR滤池工艺对文具厂油墨废水进行处理,通过工程实例,对工艺流程,构筑物的设计参数,调试运行进行探讨。结果表明:对于COD较大,色度非常高的油墨废水经该工艺处理后,能达到GB8978-1996《废水综合排放标准》中一级排放标准,且该工程投资小,运行费用低;管理简单方便。This article describes the case of using coagulation ＋ hydrolytic acidification pond ＋ BIOFOR filter process to treat stationery factory ink wastewater.The process flow,structure design parameters,debugging and running are also described.For larger COD and colority treated by the process can meet the first-order of ＂Integrated Wastewater Discharge Standard＂（GB8978-1996）.Whose investment and operation cost are low;management is simple and convenient.

关 键 词：油墨废水 混凝 水解酸化 BIOFOR滤池 

分 类 号：X703[环境科学与工程—环境工程]