1,2-环氧环己烷的精馏工艺研究  

Study on Distillation Process of 1,2-Epoxy Cyclohexane

作　　者：王训遒[1,2] 庄新亮[1] 秦雪英[1] 王卉[1] 蒋登高[1] 陈静波[2] 

机构地区：[1]郑州大学化工与能源学院,郑州450001 [2]郑州大学材料科学与工程学院,河南郑州450001

出　　处：《郑州大学学报（工学版）》2011年第2期23-25,共3页Journal of Zhengzhou University（Engineering Science）

基　　金：河南省杰出人才基金项目(0121001900)

摘　　要：针对双氧水氧化环己烯制得的有机相,经过环己烯回收和1,2-环氧环己烷精制2次常压精馏,获得了纯度达99.68%的1,2-环氧环己烷.通过内标法定量测定馏出液中环己烯与1,2-环氧环己烷的含量,分别考察了回流比与采出率对环己烯回收和1,2-环氧环己烷纯度的影响,确定了精馏分离的较佳工艺条件:回流比为15,环己烯的采出率为原料液的51%,环氧环己烷的采出率为26%.99.68%（by mass） 1,2-epoxy cyclohexane was obtained from the oil phase of oxidation of cyclohexene with hydrogen peroxide by two steps of batch distillation at normal pressure,including the cyclohexene recovery and purification of 1,2-epoxy cyclohexane.The contents of cyclohexene and 1,2-epoxy cyclohexane in distillates were determined by the internal standard method of GC.The effects of reflux ratio and recovery rate on the cyclohexene recovery and purification of 1,2-epoxy cyclohexane were investigated and the optimized distillating conditions were obtained as follows： reflux ratio 15,recovery rate of cyclohexene 51%（by mass） and recovery rate of 1,2-epoxy cyclohexane 26%（by mass）.

关 键 词：1 2-环氧环己烷 环己烯 精馏 分离 

分 类 号：TQ231[化学工程—有机化工]