(Bi_(0.5)Na_(0.5))_(0.94)Ba_(0.06)TiO_3粉体的球磨时间对陶瓷显微结构与性能的影响  

Effect of Powder Milling Time on the Structure and Electrical Properties of(Bi_(0.5_Na_(0.5))_(0.94)Ba_(0.06)TiO_3 Lead Free Ceramics

作　　者：付鹏[1] 王伟[1] 杨成涛[1] 武保增[1] 周厚芳[1] 陈哲[1] 

机构地区：[1]聊城大学材料科学与工程学院,聊城252059

出　　处：《硅酸盐通报》2011年第2期487-491,共5页Bulletin of the Chinese Ceramic Society

基　　金：国家自然科学基金(No.50602021);聊城大学科技创新基金(SRT10013CL2;SRT10019CL2)

摘　　要：本文研究了(Bi0.5Na0.5)0.94Ba0.06TiO3(BNBT6)陶瓷制备过程中球磨时间对BNBT6粉体和BNBT6陶瓷结构和性能的影响,研究发现:随球磨时间的延长,BNBT6粉体粒径不断减小,s/v不断增加,但变化幅度不断减小,球磨20h后的粉体粒度达到0.20μm,且粒度分布较窄。随球磨时间的延长,用相应粉体制得的BNBT6陶瓷电学性能都随球磨时间的增加先增大后减小,且球磨20 h的粉体制得的BNBT6陶瓷压电性能最好,常温下其压电常数d33达到145 pC/N,kp达到0.305,Qm达到160,介电常数达到1400,介电损耗为0.052(10 kHz)。Effects of powders milling time on the structure and properties of（Na0.5Bi0.5）0.94Ba0.06TiO3（BNBT6） powders and ceramics were investigated.With the increase of powders milling time,the particle size of the powders decreases constantly while s/v of the powders increases gradually,but the change rate of the particle size and s/v is decreasing.The particle size of the powders milled for 20 h attaines 0.20 μm,and the grain-size distribution is narrow.With the increase of powders milling time,all electrical properties of BNBT6 ceramics made by corresponding powders milled for different time increases firstly,and then decreases.At room temperature,the ceramics made by the powders milled for 20 h show superior performance with high piezoelectric constant（d33 = 145 pC/N）,high planar coupling factor（kp = 0.305）,high mechanical quality factor（Qm = 160）,high relative dielectric constant（εr = 1400） and lower dissipation factor（tanδ= 0.052） at a frequency of 10 kHz.

关 键 词：球磨时间 (Bi0.5Na0.5)0.94Ba0.06TiO3陶瓷 结构 电学性能 

分 类 号：TM28[一般工业技术—材料科学与工程]