一种新型平板式压电六维力/力矩传感器及仿真实验  

A Novel Parallel Piezoelectric Six-Axis Force/Torque Sensor and its Simulation

作　　者：刘俊[1] 秦岚[1] 李敏[2] 刘京诚[1] 薛联[1] 

机构地区：[1]重庆大学光电技术及系统教育部重点实验室,重庆400044 [2]四川理工学院,四川自贡629200

出　　处：《传感技术学报》2011年第3期354-359,共6页Chinese Journal of Sensors and Actuators

基　　金：高等学校博士学科点专项科研基金项目(20100191110011);2010年度重庆市工业发展资金(产研专项)项目;中央高校基本科研业务费(CDJXS11122220;CDJXS11121145)

摘　　要：针对弹性体式六维力/力矩传感器存在的瓶颈矛盾,提出了一种新型平板式压电六维力/力矩传感器。首先,介绍了传感器的结构和工作原理。然后,推导了传感器的数学模型,建立了传感器的有限元模型。最后,得到了传感器输出的电荷灵敏度、维间干扰、固有频率、载荷传递系数、退耦矩阵等重要参数。研究结果表明:传感器结构简单合理、数学模型正确、加工工艺性好、线性度好、刚度高、固有频率大于25 kHz、使用退耦矩阵后的维间干扰小于1%。基本满足传感器的设计指标。According to the bottleneck contradictions of elastic style six-axis force sensor,a novel parallel piezoelectric six-axis force/torque sensor is proposed.First,the sensor ＇ s structure and operating principle are presented.Then its mathematic model is derived,and finite element model of sensor is established analyzed by ANSYS software.Finally,the sensor ＇ s input charge sensitivity,coupling interference,natural frequency,load transfer coefficient and decoupling matrix are obtained.Research results indicate that the sensor has advantages in simple and rational structure,correct mathematic model,nice manufacturability,good linearity,good rigidity,and natural frequency is more than 25 kHz,the interference error is less than 1% with decoupling matrix.It can satisfy the requirements of sensor ＇ s design target.

关 键 词：压电传感器 力/力矩传感器 有限元 六维 

分 类 号：TH7[机械工程—仪器科学与技术]