平头螺旋刃立铣刀切削力预报模型的建立与数值仿真(二)——切削参数对铣削力的影响  

Milling Force Predicting Modelling and Numerical Simulation for Helical Tooth Cylindrical Milling Cutters(Part Ⅱ:Influence of Cutting Parameters on Milling Force)

作　　者：王启东[1] 刘战强[1] 汤爱民 曾滔 

机构地区：[1]山东大学 [2]株洲钻石切削刀具股份有限公司

出　　处：《工具技术》2011年第4期8-14,共7页Tool Engineering

基　　金：高档数控机床与基础制造装备科技重大专项资助项目(2009ZX04014-043;2009ZX04012-031;2009ZX04012-012;2010ZX04017-012);国家科技支撑计划重点项目(2008BAF32B01);863计划资助项目(008AA042405)

摘　　要：铣削力对刀具变形、工件变形、刀具寿命、加工表面质量均有重要影响,是计算切削功率,设计和使用机床、刀具、夹具和优化加工工艺不可缺少的依据,并直接影响切削热的产生。由于缺乏精确的切削力信息,在生产车间实际加工中通常采用较保守的加工条件,致使加工效率降低和生产成本提高。因此建立可靠的切削力预报模型,在实际加工之前预测出切削力对合理选择切削用量、刀具几何参数、优化数控程序等均具有重要意义。本文在第一部分研究基础上,研究铣削方式(顺铣、逆铣)、每齿进给量、轴向切削深度、径向切削深度等切削条件对铣削力的影响。Milling force has important effects on the deformation of cutters and work-piece,tool life and the machined surface quality.It is also the key basis for the calculation of cutting power,design and application of maching tools as well as cutting tools,holders and cutting process optimization.Cutting force has an immediate impact on the generation of cutting heat.Conservative processing conditions often decrease machining efficiency and raise production costs in the practical machining due to the lacking the accurate knowledge of cutting force.Hence,a reliable milling force predicting modeling has an important significance for predicting milling force,properly selecting cutting parameters,cutter geometry,optimizing the NC programs.This research includes two parts.Part II deals with the effects of milling pattern（down-cut and up-cut milling）,feed per tooth,axial and radial depth-of-cut on milling force.

关 键 词：立铣刀 切削力 机械力学建模 切削参数 

分 类 号：TG714[金属学及工艺—刀具与模具]