多轴超声C扫描系统在车辆负重轮检测中的应用  

Application of muti-axis ultrasonic C-scan system in the inspection of loading wheel

作　　者：乔日东[1] 张维国[1] 郭智敏[1] 唐盛明[1] 李红伟[1] 齐子诚[1] 谢志萍[2] 

机构地区：[1]中国兵器科学研究院宁波分院,浙江宁波315103 [2]内蒙古一机集团包头北方创业股份有限公司,内蒙古包头014032

出　　处：《兵器材料科学与工程》2011年第2期99-102,共4页Ordnance Material Science and Engineering

基　　金：浙江省分析测试项目(2009F70041)

摘　　要：采用多轴超声水浸C扫描系统检测车辆负重轮的内部缺陷,对扫描工艺参数、曲面路径快速编制进行了研究,获得了最佳检测工艺参数及快速编制曲面跟踪路径方法。结果表明,曲面跟踪C扫描检测是车辆负重轮理想的检测方法,不仅有利于缺陷的检出,而且检测结果准确、检测效率高,适合大批量作业。The muti-axis ultrasonic acquisition system was adopted to inspect the internal defect of loading wheel.Experiments were carried out to determine the suitable scan parameters and the method to get tracking path on curve surface.The results show that curve surface tracking C-scan technique is the ideal method in road wheel′s inspection.The method is suitable to inspect the defect,and the test result is accurate with high efficiency and is applicable for the typical products in mass production.

关 键 词：超声波C扫描检测 曲面跟踪 工艺参数 车辆负重轮 缺陷 

分 类 号：TG115.28[金属学及工艺—物理冶金]