压铸模具钢H13热疲劳裂纹扩展规律的试验研究  

Experimental Study on the Crack Propagation Rule of H13 Used for oie Casting Dies

作　　者：宁志良[1] 周彼德[1] 薛祥 武运启[2] 

机构地区：[1]哈尔滨工业大学材料科学与工程学院,黑龙江哈尔滨150001 [2]哈尔滨理工大学材料科学与工程学院,黑龙江哈尔滨150080

出　　处：《哈尔滨理工大学学报》1999年第4期77-79,共3页Journal of Harbin University of Science and Technology

摘　　要：依据模拟压铸铝合金模具的工作条件，研究了压铸模具钢H13的热疲劳裂纹的扩展规律．试验结果表明：在本试验条件下，热循环至430周时形成第一条热疲劳裂纹，随后热疲劳裂纹迅速扩展，当最大裂纹长度达到1．78mm时，热疲劳裂纹长度与热循环周次呈线性关系．The propagation rules of hot fatigue of H13 used for die casting dies were studiedthrough simulating the work conditions of die casting dies. The experimental results showed thatthe first hot fatigue cracked when the number of cycles was 430 under this experimenta1 condi-tions, and then the hot fatigue cracks developed rapiop. When the maximum crack length became1.78 mm, it had liner relation with the number of cycles.

关 键 词：模具钢 热疲劳 裂纹扩展 压力铸造 

分 类 号：TG142.45[一般工业技术—材料科学与工程] TG249.2[金属学及工艺—金属材料]