棉织物的轧蒸潮态抗皱整理  

Pad-steam anti-crease finish of cotton fabric

作　　者：王海英[1] 李栋[2] 

机构地区：[1]南京工业大学,江苏南京210009 [2]通标标准技术服务有限公司,上海200233

出　　处：《纺织学报》2011年第5期91-94,共4页Journal of Textile Research

摘　　要：为减少棉织物传统焙烘抗皱整理对织物断裂强力和白度造成的损伤,对棉织物的轧蒸潮态抗皱整理方法进行探索。讨论棉织物潮态抗皱整理过程中聚马来酸浓度、催化剂用量、汽蒸温度和时间等因素变化对折皱回复角、织物断裂强力及白度的影响。实验结果表明,棉织物进行抗皱整理时采用潮态整理工艺同普通焙烘工艺相比,前者不仅能取得同焙烘工艺相当的抗皱性能,而且织物的其他性能指标如断裂强力等也明显优于焙烘工艺。A pad-steam anti-crease finish process has been studied in order to reduce the loss of breaking strength and whiteness of cotton fabrics resulted from traditional pad-dry-cure anti-crease finish.The influence of concentration of polymaleic acid and catalyst,temperature and time of steaming on the wrinkle recovery angle,breaking strength and whiteness was investigated.The experimental results revealed that compared with the traditional anti-crease finish process,the fabric treated by this wet state process showed equivalent anti-crease property but better breaking strength and other indexes.

关 键 词：棉织物 抗皱整理 潮态 织物性能 

分 类 号：TS195.41[轻工技术与工程—纺织化学与染整工程]