月桂酸单异丙醇酰胺磺基琥珀酸单酯盐的合成及性能  

Synthesis and properties of disodium sulfosuccinate monoester of LMIPA

作　　者：李素荣[1] 

机构地区：[1]安徽理工大学化学工程学院,安徽淮南232001

出　　处：《应用化工》2011年第4期618-621,626,共5页Applied Chemical Industry

基　　金：安徽省教育厅自然科学基金项目(KJ2009B030Z)

摘　　要：以月桂酸单异丙醇酰胺(LMIPA)为原料,用顺丁烯二酸酐酯化,再经Na2SO3磺化合成月桂酸单异丙醇酰胺磺基琥珀酸单酯盐(LMIPA-SS),对其合成条件进行了探索研究,并测试其性能。结果表明:酯化条件为n(LMIPA)∶n(顺酐)=1∶1.15,酯化温度75℃,选用碱性催化剂其用量为原料质量的1.5%为宜;磺化反应以25%的Na2SO3水溶液加入,其加入量为加酐量的1.10倍,磺化温度70℃较佳。该条件下的产品收率达81.09%以上,经提纯后PAPGS的纯度可达91.13%,同时研究了月桂酸单异丙醇酰胺磺基琥珀酸单酯盐的性能,其主要表面化学性能为:表明张力为31.83×10-3N/m,临界胶束浓度为8×10-4mol/L,钙皂分散力LSDP为30%,乳化性为32′57″,泡沫性为118 mm/102 mm。LMIPA-SS was synthesized by esterifying LMIPA with maleic anhydride and then sulfonating the monoester with Na2SO3.The synthetic conditions of LMIPA-SS were explored and the product properties were tested.The results demonstrate that the suitable esterifying conditions are as follows：the molar ratio of LMIPA to maleic anhydride 1 ∶1.15,the reaction temperature 75 ℃.Amount of alkaline catalyst was 1.5%（based on the weight of LMIPA）.The optimum sulfonating conditions are to add 25% Na2SO3 water solution whose amount is 1.10 times of C4H2O3,and the reaction temperature kept at 70 ℃.Under these conditions,yield of LMIPA-SS is 81.09% and the purity can reach 91.13% after purification.The properties of LMIPA-SS were also studied.The main surface chemical properties are as follows：the critical surface tension 31.83×10^-3N/m,the critical micelle 8×10^-4 mol/L,the dispersibility LSDP 30%,the emulsifying 32′57〃,the foaming properties 118 mm/102 mm.

关 键 词：月桂酸单异丙醇酰胺 酯化 磺化 磺基琥珀单酯盐 

分 类 号：TQ423.11[化学工程]