12FM110密封铅酸蓄电池的设计  

Development of 12 FM110 sealed lead acid battery

作　　者：周立新[1] 

机构地区：[1]天津蓝天电源公司,天津3000381

出　　处：《电源技术》1999年第5期270-274,共5页Chinese Journal of Power Sources

摘　　要：详细介绍了１２ ＦＭ１１０ 密封铅酸蓄电池的全部设计过程及工艺参数。通过采用薄极板技术，将正负板栅分别减薄至正板栅２．１ｍ ｍ 、负板栅１．５ ｍｍ ，相应增加纵筋数量；正极铅膏中加入适量四氧化三铅，选取适宜的电液量及电液密度等手段，提高了电池的比能量达４０ Ｗｈ／ｋｇ，改善了低温性能。同时，采用穿壁焊及热封工艺，紧装配设计，大大提高了电池的抗振能力。All technological parameters and processes of 12 FM110 sealed lead acid battery were introduced. By means of the thin plate technique, the thickness of positive grid and negative grid was decreased to 2.1 mm and 1.5 mm respectively. In addition, adding proper Pb 3O 4 in positive plate and selecting appropriate quantity and density of electrolyte could increase the specific energy up to 40Wh/kg and improve the performance at low temperature. Moreover, the technology of hot seal and across the wall soldering were employed as well as the light assembly design for improving the anti viberation ability and cycle life of the battery greatly.

关 键 词：铅酸蓄电池 薄极板 比能量 设计 密封式蓄电池 

分 类 号：TM912.102[电气工程—电力电子与电力传动]