混凝法处理制药废水的研究  

The Study on Treating Pharmaceutical Wastewater by Coagulating Method

作　　者：吴敦虎[1] 李鹏 王曙光[1] 聂英华 

机构地区：[1]大连铁道学院交通运输工程分院,辽宁大连116028 [2]大连市沙河口环境监测站,辽宁大连116021

出　　处：《大连铁道学院学报》1999年第3期92-96,共5页Journal of Dalian Railway Institute

摘　　要：聚合氯化硫酸铝和聚合氯化硫酸铝铁混凝剂处理COD为1000～4000mg/L制药废水的最佳工艺条件：pH范围为6.0～7.5搅拌速度为160r/min；搅拌时间15min；一次处理混凝剂投加量为300mg/L，沉降时间150min，COD去除率在80％以上．若分二次投药处理效果更佳．一次混凝处理后，经无烟煤——石英砂滤柱过滤，出水的pH、COD、SS均达到国家排放标准，The optimum technology conditions of treating pharrmaceutical wastewater, which COD value is 1000 to 4000mg/L, are as follows: the scope of pH value is 6.0-7.5, the agitating rate is 160r/min and the agitating time 15 min, when the eoagulants PACh and PAFCS are applied. The dosage of the coagulants is 300mg/L, the sutsidence the is 150min and the removal ratio of COD is more than 80% when the wastewater is simply treated once. The treatment effect is much better when the two-step adding method is utilized . The values of pH, COD and SS reach National Discharge Criterion When the discharge water is filtered with anthracite-quartz sand filter cylinder following the simple one-coagulation.

关 键 词：制药废水 聚合氯化硫酸铝 混凝法 PAFCS 

分 类 号：X780.3[环境科学与工程—环境工程]