轧制复合法制造金刚石-金属复合体的研究  

Manufacture of diamond-metal composites by rolling compositing technology

作　　者：王明智[1] 李晓普[1] 徐高伟[1] 赵玉成[1] 闫宁[1,2] 

机构地区：[1]亚稳材料制备技术与科学国家重点实验室,燕山大学,河北省秦皇岛市066004 [2]郑州磨料磨具磨削研究所,郑州450001

出　　处：《金刚石与磨料磨具工程》2011年第2期35-39,共5页Diamond & Abrasives Engineering

基　　金：国家重点实验室自主项目(2010新)

摘　　要：本文采用铜基板和F8钢基板以及MBD6金刚石进行了轧制复合试验,对制得的最终厚度0.12mm的金刚石-金属复合体进行了分析。讨论了轧制复合法(下称RC)试验过程中金刚石的破碎、形态、分布情况及结合强度,评估了RC法用于金属结合剂金刚石胎体制造的可能性。实验结果表明,RC法用于金属结合剂金刚石工具制造是完全可行的。By using copper and F8 steel substrates respectively and MBD6 diamonds,rolling compositing（RC） experiments were conducted.Diamond composites of final thickness 0.12 mm were prepared and tested.The breaking ratio,morphology as well as distribution of diamonds and the bonding strength to diamond grits during the rolling compositing were analyzed.The possibility of making metal bond diamond tools with this new technology was evaluated.The results showed that metal bond diamond tools can be fabricated by RC technology.

关 键 词：金属结合剂 轧制复合技术 金刚石复合体 磨粒形貌 

分 类 号：TG74[金属学及工艺—刀具与模具] TQ164[化学工程—高温制品工业]