低周反复水平荷载下不同轴压比Z形截面混凝土柱受力性能数值分析  

Study on numerical analysis of behavior of Z-shaped RC column subjected to low-cyclic horizontal load under different axial compression ratio

作　　者：季青[1] 杨俊杰[1] 陈瑞生[1] 朱振华[1] 

机构地区：[1]浙江工业大学建筑工程学院,浙江杭州310032

出　　处：《浙江工业大学学报》2011年第3期282-286,共5页Journal of Zhejiang University of Technology

基　　金：浙江省建设厅;财政厅建设科技基金资助项目(浙财建字[2007]182号)

摘　　要：通过ANSYS对低周反复水平荷载作用下Z形截面柱受力性能进行数值模拟分析,研究其不同轴压比下的抗剪承载力和延性等受力性能,轴压比μ从0.1变化到0.9.结果表明:轴压比μ的变化对低周反复荷载下Z形柱的受力性能影响较大.最后,给出可供实际工程设计参考的抗剪承载力计算公式,并将公式的计算值与实验值进行比较,验证了公式的可行性.According to numerical simulation analysis by ANSYS,behavior of Z-shaped RC column subjected to low-cyclic horizontal load,the shear capacity and ductility were studied under different axial compression ratio μ,which arranged from 0.1to 0.9.The results showed that changes of axial compression ratio μ had a great impact on behavior of Z-shaped RC column.Finally,the formula of the shear capacity was proposed for reference of practical engineering design.The value of the shear capacity calculated by using the formula was compared with the experimental data,which verified the formula.

关 键 词：Z形截面柱 低周反复荷载 轴压比 承载力 

分 类 号：TU375.3[建筑科学—结构工程]