检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:朱小明[1] 刘博[1] 王长柏[1] 邹飞[1] 莫振泽[1]
机构地区:[1]中国科学院武汉岩土力学研究所,岩土力学与工程国家重点实验室,武汉430071
出 处:《水文地质工程地质》2011年第3期38-41,共4页Hydrogeology & Engineering Geology
基 金:国家自然科学基金项目(40872188)
摘 要:通过常法向应力直剪试验研究了含不同二阶规则起伏体高度结构面的剪切特性。试验结果表明:与只含一阶起伏体结构面不同,含二阶起伏体结构面会有多峰值剪应力和波浪状的变形曲线,会出现多次剪断破坏或一次剪断破坏的破坏特征,随着二阶起伏体高度的增大,结构面剪切强度增大。The mechanical properties of structural planes with different heights of regular second-order asperities are examined by the monotonic shear tests under constant normal stress. The experimental results show that the structural planes with second-order asperities have multi-peak shear stress and wavy deformation curves, and the failure modes may appear many-times or one-time shearing of asperities, which are different from the structural planes with the only first-order asperities. Peak shear strength increases with the increasing second-order asperities height.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.1