太阳电池组件焊接过程残余应力的数值模拟  

NUMERICAL SIMULATION ON THE RESIDUAL STRESS OF JOINTING PROCESS OF SOLAR CELL MODULE

作　　者：孙国辉[1,2] 晏石林[1] 陈刚[1] 

机构地区：[1]武汉理工大学理学院,武汉430070 [2]浙江万向太阳能有限公司,杭州311121

出　　处：《太阳能学报》2011年第5期694-697,共4页Acta Energiae Solaris Sinica

基　　金：国家自然科学基金(50573060)

摘　　要：采用有限元分析软件ANSYS分析太阳电池组件在焊接工艺中残余应力的分布情况,通过改变电池片的焊接区域、焊接温度和焊条型号,讨论焊接工艺对电池片强度产生的影响。结果表明:太阳电池组件焊接工艺中焊带的施焊端及附近区域的应力集中程度较高,应避免在电池片的边缘施焊,尽量减小焊接温差,选用较细的焊条。In the jointing process of the solar cell module, since the mismatch of heat expansion coefficients of various materials and the biggish difference in temperature of jointing local region, the residual stresses is caused in silicon mate- rial layer of solar cell. Numerical simulation was carried out on the jointing process of the solar cell module by the finite element software ANSYS, to analyze the distribution of residual stress. The impact on jointing teehnigues to cell intensity was discussed by changing jointing area, temperature system and welding rod type. The results showed that stress concen- tration degree is high in the end of weld region. The edge of solar cell welded should be avoided, and reduce difference in temperature of jointing, and select the thin welding rod.

关 键 词：太阳电池组件 焊接 有限元 残余应力 

分 类 号：TK511[动力工程及工程热物理—热能工程]