基于C语言的压电式喷墨打印机驱动程序设计  

Driver Design of Piezoelectric Inkjet Printer Based on C Language

作　　者：马玉春[1] 陆华[1] 

机构地区：[1]琼州学院海南省嵌入式系统重点实验室,海南三亚572022

出　　处：《琼州学院学报》2011年第2期11-14,共4页Journal of Qiongzhou University

基　　金：海南省自然科学基金项目(610225);海南省高等学校计算机类课程教学改革项目(HJJSJ201019);琼州学院学科带头人和博士科研启动基金项目(QYXB201007)

摘　　要：压电式喷墨打印机是现在市面上最流行的打印机之一。首先分析了压电式喷墨打印机的工作原理,接着测试压电式喷墨打印机,并绘制出其工作时序图,剖析其逻辑关系,在此基础之上利用STM32F105开发板和IAR Embedded Workbench For ARM5.40开发工具搭建开发环境,完成了压电式喷墨打印机的驱动程序的研发,测试表明达到了预期效果。Piezoelectric inkjet printer is one of the most popular printers on the market now.At first,working mode of piezoelectric inkjet printer is analyzed;printing sequence diagram is recorded by testing piezoelectric inkjet printer.Based on all mentioned above,the system logic relation is caught,so as to build development environment though the IAR Embedded Workbench for ARM 5.40 development tools and STM32F105 development board.Finally,the piezoelectric inkjet printer driver is finished,and testing result shows expected results achieved.

关 键 词：压电式喷墨打印机 驱动程序 STM32F105开发板 定时器 中断 

分 类 号：TP311.52[自动化与计算机技术—计算机软件与理论]