Estimation of Fine Dust Particles Distribution in Machining Workshop Based on COwZ Model  

作　　者：REN Fan LIU Fei 

机构地区：[1]State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400030, China

出　　处：《Chinese Journal of Mechanical Engineering》2011年第3期346-354,共9页中国机械工程学报（英文版）

基　　金：supported by National Natural Science Foundation of China (Grant No. 50775228)

摘　　要：Fine dust particles （diameter is less than 2.5 μm） generated during machining processes,especially dry cutting,are harmful to operators,because they remain suspended in the air for long time and have marked concentration gradients in workshop.Hence studies about cutting dust source states and indoor air quality prediction have been developed.However,few researches focus on the distribution state of the cutting dust,dynamic status of fine dust particles,and environment estimating of the machining workshop.The machining workshops have diversified architectural structures,complex working conditions,so the dust emission is sensitive dynamic.According to these features,after analysis of the static and dynamic influence factors,this paper proposes a method and establishes a model to estimate the fine dust particles distribution based on COwZ （COMIS （conjunction of multizone infiltration specialists） with sub-zones） model when only dry cutting is processed just needing various working parameters.And two key technologies are discussed：the description of the machine tools using sub-zones of COwZ model considering the local obstacle effects of machine tools themselves;description and implementation of dynamic process of cutting dust emission with a new concept of equivalent source strengths.At last,multi-point experiments in a hybrid ventilation machining workshop prove the method is practical.Good agreement was observed between the estimation results and the experimental measurements for the investigated conditions.The proposed method can supply reference data for green manufacturing.Fine dust particles （diameter is less than 2.5 μm） generated during machining processes,especially dry cutting,are harmful to operators,because they remain suspended in the air for long time and have marked concentration gradients in workshop.Hence studies about cutting dust source states and indoor air quality prediction have been developed.However,few researches focus on the distribution state of the cutting dust,dynamic status of fine dust particles,and environment estimating of the machining workshop.The machining workshops have diversified architectural structures,complex working conditions,so the dust emission is sensitive dynamic.According to these features,after analysis of the static and dynamic influence factors,this paper proposes a method and establishes a model to estimate the fine dust particles distribution based on COwZ （COMIS （conjunction of multizone infiltration specialists） with sub-zones） model when only dry cutting is processed just needing various working parameters.And two key technologies are discussed：the description of the machine tools using sub-zones of COwZ model considering the local obstacle effects of machine tools themselves;description and implementation of dynamic process of cutting dust emission with a new concept of equivalent source strengths.At last,multi-point experiments in a hybrid ventilation machining workshop prove the method is practical.Good agreement was observed between the estimation results and the experimental measurements for the investigated conditions.The proposed method can supply reference data for green manufacturing.

关 键 词：COwZ model dry cutting fine dust particles dust emission green manufacturing 

分 类 号：TH18[机械工程—机械制造及自动化] TN911.73[电子电信—通信与信息系统]