氧化钛纳米棒/纳米颗粒复合晶膜电极的制备与应用  

Preparation and Applications of TiO_2 Nanorod/Nanoparticle Composite Film Electrodes

作　　者：赵丽[1,2] 戴国田[1] 王世敏[1] 卢红兵[1] 董兵海[1] 许祖勋[1] 余家国[2] 

机构地区：[1]湖北大学,功能材料绿色制备与应用省部共建教育部重点实验室,武汉430062 [2]武汉理工大学材料复合新技术国家重点实验室,武汉430070

出　　处：《硅酸盐学报》2011年第6期963-967,共5页Journal of The Chinese Ceramic Society

基　　金：国家“973”计划前期研究(2010CB234606);中国博士后科学基金(20100471164);湖北省教育厅科学技术研究计划(Q20091007,Z20101001);湖北省自然科学基金(2009CDB351,2009CDA027)资助项目

摘　　要：用水热法制备的TiO2纳米棒与纳米颗粒P25混合制备复合晶膜电极,通过扫描电镜、透射电镜、紫外-可见吸收光谱和电池的光电性能测试,分析掺入纳米棒对染料敏化太阳能电池(dye-sensitized solar cells,DSSC)性能的影响。结果表明:加入一定量的TiO2纳米棒可以改善复合薄膜对染料的吸附量和薄膜电极对光的捕获能力,提高光电输出值;在100 mW/cm2光照条件下,DSSC的光电转换效率达到4.66%。Nano-crystalline TiO2 composite film electrodes were prepared by mixing P25 nanoparticles and TiO2 nanorods synthe-sized by the hydrothermal method.Influences of nanorods amount on photoelectronic properties of the dye-sensitized solar cells（DSSC） were confirmed by a scanning electron microscopy（SEM）,transmission electron microscopy（TEM）,ultraviolet-visible ab-sorption spectra,and the photocurrent-voltage curve of the DSSC.Results show that TiO2 nanorods can increase adsorption capacity and light scattering of the composite film electrodes and improve the photoelectric output.Photoelectric conversion efficiency with the film electrode can be 4.66% irradiated by a solar simulator with 100 mW/cm2.

关 键 词：二氧化钛纳米棒 复合薄膜 光电转换性能 

分 类 号：O64[理学—物理化学]