基于构件的接口测试系统软件框架研究  

Research on Frame of Interface Test System Software Based on Components

作　　者：房莉[1] 陈湘平[1] 伍良坤[1] 

机构地区：[1]空军雷达学院预警监视情报系,湖北武汉430019

出　　处：《计算机测量与控制》2011年第6期1493-1497,共5页Computer Measurement &Control

摘　　要：经过对大量设备的接口测试软件调查研究,发现现有的测试软件大多都是采用传统的软件开发方法且只针对某个具体设备开发,软件可复用度低、可扩展性差;针对此问题,基于构件思想对接口测试软件框架进行设计,研究了构件的适配和组装机制,对构件适配逻辑和组装逻辑进行了规范,设计了构件的组装框架和运行框架,并在.NET平台下进行了实现;用户可以方便地通过调整、修改、添加、删除构件之间的连接关系就可以实现对不同设备接口的测试,以避免对只是存在一点差异的不同设备就不得不重新开发一套测试系统,节约了大量的开发费用,系统具有复用度高、易扩展等特点。After investigating and researching on lots of interface test software systems, it was found that the software systems were difficult to be reused and expanded. Aiming at these problems, this paper modeled the test system software based on components, researched on the logic of matching and composition of component which was specified, and designed an automatic component composition frame and run- ning frame which was implemented under the p[atform of . NET. The users can easily integrate the testing software system based on the frame. The frame characterizes easy operation, easy expansibility, and resolved the problems of reuse and expansibility of the present interface test software system.

关 键 词：构件 框架 接口测试 

分 类 号：TP311.5[自动化与计算机技术—计算机软件与理论]