导爆索爆轰波压力测试技术研究  

Research on Technology of Shock Wave Pressure Testing for Detonating Cord

作　　者：魏林[1] 王高[2] 赵辉[1] 赵慧明[1] 高志强[1] 

机构地区：[1]中北大学信息与通信工程学院,山西太原030051 [2]中北大学仪器与动态测试教育部重点实验室,山西太原030051

出　　处：《火工品》2011年第2期44-46,共3页Initiators & Pyrotechnics

基　　金：2011年仪器科学与动态测试教育部重点实验室青年基金项目

摘　　要：为测量导爆索端面的输出压力,介绍了锰铜压阻式传感器爆压测量的工作原理,并根据其原理设计了一种爆压测试系统;利用该装置对导爆索端面的压力进行了多次测量,得到了较满意的测试结果,同时对失败的测试原因进行了深入的分析和讨论。In order to measure the output pressure of the end of detonating cord, the principle of detonation pressure testing of detonating cord using manganin piezoresistive sensor has been introduced, and a detonation pressure testing system was designed based on the principle. A series of data of detonation pressure on the end of detonating cord have been measured, and satisfactory test results were obtained. Meanwhile, the deep analysis and discussion about failing test has been carried out.

关 键 词：导爆索 爆轰波 爆压 锰铜传感器 

分 类 号：TJ450.6[兵器科学与技术—火炮、自动武器与弹药工程]