生物絮凝剂的絮凝活性及絮凝条件研究  

Study on Flocculation Activity and Flocculation Conditions of Bioflocculant

作　　者：刘江红[1] 潘洋[1] 戴红霞[1] 贾云鹏[1] 

机构地区：[1]东北石油大学化学化工学院,黑龙江大庆163318

出　　处：《化学与生物工程》2011年第6期46-48,55,共4页Chemistry & Bioengineering

基　　金：黑龙江省教育厅科学技术研究项目(1153005)

摘　　要：从活性污泥中筛选得到1株絮凝活性较高且稳定的菌株,命名为C4-3,对其絮凝活性及絮凝条件进行了研究。结果表明,C4-3的絮凝活性物质主要为菌体分泌物;在絮凝剂投加量为1 mL.（100 mL）-1、1%CaCl2助凝剂投加量为1~6 mL、pH值为8.0~11.0的絮凝条件下,C4-3对1~7 g.L-1高岭土悬浊液模拟废水的絮凝效果较好,且具有广泛的pH值适应性、良好的热稳定性,适于工业化生产。Flocculant-producing bacterium named as C4-3 which had higher and stable flocculation activity was isolated from the activated sludge,and its flocculation activity and flocculation conditions were investigated.The result showed that,the flocculation active substances produced by C4-3 were mainly its extracellular metabolites.For 1~7 g·L-1 Kaolin clay suspension,the bioflocculant exhibited effective flocculation performance under the conditions as follows： bioflocculant amount of 1 mL·（100 mL）-1,coagulant aid 1% CaCl2 amount of 1~6 mL,pH value of 8.0~11.0.In addition,the bioflocculant could be applied in a wide pH value range with good thermostability,so it was suitable for industrial production.

关 键 词：生物絮凝剂 絮凝剂产生菌 絮凝活性 絮凝条件 

分 类 号：Q93[生物学—微生物学] X703.1[环境科学与工程—环境工程]