盾构刀盘驱动液压系统压力冲击吸收特性分析  

Characteristics analysis of pressure impact absorption for shield cutter head drive hydraulic system

作　　者：滕韬[1] 夏毅敏[1] 杨务滋[1] 谭青[1] 

机构地区：[1]中南大学机电工程学院,湖南长沙410083

出　　处：《浙江大学学报（工学版）》2011年第5期864-868,共5页Journal of Zhejiang University：Engineering Science

基　　金：国家'973'重点基础研究发展计划资助项目(2007CB714002);湖南省博士后基金资助项目(2009RS3023);中南大学博士后基金资助项目(743410151)

摘　　要：针对盾构掘进地层复杂、负载冲击大的工况特点,提出一种基于压力反馈和电液比例控制的新型开式刀盘驱动液压系统.通过对元件模型的线性化处理建立泵-马达-蓄能器系统的动态数学模型,分析蓄能器的引入对于系统固有频率的影响.同时利用AMESim中的液压模块化元件与液压元件自主设计库(HCD)联合建模,对刀盘在不同工况的仿真过程中,通过比例方向阀控制蓄能器的不同工作状态来研究更好的冲击吸收效果.结果表明,在不同的负载剧变所带来的压力冲击下,蓄能器在吸收冲击的同时也影响到了系统的稳定性,可以通过电液比例控制蓄能器的工作状态来更好地适应负载的冲击.According to the characteristics of the complex boring strata and the large impact of load, and based on pressure feedback and electro-hydraulic proportional control, a new type of open circuit drive hydraulic system of cutter head was proposed in this paper. The pumpmotor-accumulator system＇s dynamic mathematical model was established by linear treatment for the component model. The accumulator＇s impact on the system＇s natural frequency was analyzed. At the same time ,the simulation model was built by utilizing hydraulic modular components and hydraulic component design（HCD） in the AMESim. In order to control the working status of the accumulator by the proportional direction valve, the simulation study on the better impact absorption effect was carried out under different working conditions. The results show that the accumulator has also affected the stability of the system when absorbing the pressure impact by the different load drastic changes. It can be improved by the electro-hydraulic proportional control of the accumulator＇s working status to adapt to the load impact.

关 键 词：盾构机 刀盘驱动系统 电液比例控制 蓄能器 

分 类 号：TH137[机械工程—机械制造及自动化]