反射面天线机电场耦合关系式及其应用  

On Development and Application of Mechanical-Electromagnetic-Field Coupling Model of Reflector Antennas

作　　者：王从思[1] 段宝岩[1] 

机构地区：[1]西安电子科技大学电子装备结构设计教育部重点实验室,陕西西安710071

出　　处：《电子学报》2011年第6期1431-1435,共5页Acta Electronica Sinica

基　　金：国家自然科学基金项目(No.51035006;No.50805111);973项目(No.61358);新世纪优秀人才支持计划(No.NCET-09-0633);中国博士后科学基金项目(No.20100470100);陕西省自然科学基础研究计划项目(No.SJ08E203);中央高校基本科研业务费专项资金(No.K50510040001)

摘　　要：针对反射面天线随机误差和系统误差的特点,通过对Ruze公式、最佳吻合和提出的机电场耦合关系式的分析比较,从理论上研究了三者的差别.即Ruze公式未考虑反射面的系统误差,从而导致对天线结构设计和制造精度要求往往过高,而最佳吻合虽考虑了系统误差,但未考虑随机误差.机电场耦合关系式则将两种误差同时考虑进去了,并将电性能表示为结构设计变量的函数.三个典型反射面天线的实际计算验证了机电场耦合关系式的正确性与有效性,同时也表明新的场耦合关系式可综合考虑机械结构设计与电磁设计,实现反射面天线的机电集成设计.Considering surface＇s random error and systematic error of reflector antenna,the difference of both errors is discussed by comparing Ruze formula,best-fit paraboloid and mechanical-electromagnetic-field coupling model.Since the deformation error is not concerned in Ruze formula,reflector＇s precision is required too high sometimes so that the difficulty of antenna＇s design and manufacturing is increased considerably.In contrast,the precision of the reflector required by the developed coupling model could be decreased.For the same surface precision,the higher electronic performance could be obtained by the coupling model than by Ruze formula.The experimental results of three antennas respectively are given to demonstrate the difference between them.In addition,the coupling model also paves a road for realization of mechatronics design of reflector antenna in engineering.

关 键 词：反射面天线 随机误差 系统误差 Ruze公式 场耦合模型 

分 类 号：TN820.28[电子电信—信息与通信工程]