检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:于正兴[1,2] 姜福兴[1] 桂兵[3] 张安元[1]
机构地区:[1]北京科技大学土木与环境工程学院,北京100083 [2]亚利桑那大学,亚利桑那图森85721 [3]兖矿集团有限公司济宁三号煤矿,山东济宁272169
出 处:《煤炭科学技术》2011年第7期1-4,52,共5页Coal Science and Technology
基 金:国家自然科学基金资助项目(50774012);国家重点基础研究发展计划(973计划)资助项目(2010CB226803);国家建设高水平大学公派研究生资助项目(留金[2009]3003)
摘 要:基于欧拉小挠度理论建立了顶底板压杆稳定模型,煤层卸压将增加顶底板的临界载荷,增加顶底板发生冲击地压的可能性,以此提出了冲击地压治理的应力三向化理论,以济三煤矿163下00工作面为例,对冲击危险区采取了煤层卸压和爆破断底解危措施,通过钻孔窥视仪检验爆破断底的效果,观测孔发生变形、破裂或破碎,证明坚硬底板已经卸压,巷道围岩达到了应力三向化状态。工程实践表明,运用应力三向化理论对冲击危险巷道进行解危,可有效地防治冲击地压。Based on the Euler deflection theory,a roof and floor pressurized bar stabilization model was established.After the seam pressure released,the critical load of the roof and floor would be increased and the possibility of the mine strata pressure bumping to be occurred would be increased.Therefore,a stress three dimension theory was provided to control the mine pressure bumping.Taking No.163B00 coal mining face in Jisan Mine as an example,the seam pressure releasing,the floor broken with blasting and other danger releasing measures were taken to the mine pressure bumping danger area.With the bore fiberscope to inspect the floor broken effect with blasting and to observe the deformation,breaking and broken of the borehole,it could be verified that the pressure of the hard floor was released and the gateway surrounding rocks were in the stress three dimension status.The engineering practices showed that the stress three dimension theory applied to release the danger of the mine pressure bumping danger gateway could be effectively to prevent and control the mine pressure bumping.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28