改性水性光油应用性能的研究  

Research on application performance of modified waterborne varnish

作　　者：梁文波[1] 郑军[1] 张士军[1] 刘毅[1] 

机构地区：[1]保定光普化工研究所,河北保定071000

出　　处：《粘接》2011年第7期76-77,共2页Adhesion

摘　　要：用进口氟硅改性蜡乳液H-863、进口聚乙烯蜡乳液J-1、普通国产蜡浆K-13种助剂分别改性水性光油,考查了助剂对水性光油应用性能的影响。结果表明,3种聚乙烯蜡助剂中,H-863改性的水性光油性能最佳,当H-863加量为30‰时,水性光油的光泽度从60提高到80,耐磨性从1500次提高至2700次。The waterborne varnish was modified with imported modified tlUorlne and smcon containing modified wax emulsion, imported J-1 polyethylene wax （PEW） emulsion and homemade K-13 paste wax, respectively. The effects of above mentioned three addives on the application performance of modified waterborne varnish. The results showed that the waterborne varnish modified with H-863 emulsion had optimal application performance for the three PEW additives. When the H-863 emulsion content was 30%, the glossiness and wear resistance were increased from 60 and 1500 times to 80 and 2700 times, respectively.

关 键 词：水性光油 光泽度 耐磨性 

分 类 号：TQ436.5[化学工程]