化学预处理温度对慈竹化机浆漂白性能的影响研究  

Effect of Pretreatment Temperature on Hydrogen Peroxide Bleaching for Chemimechanical Pulps from a Bamboo Species Neosinocalamus Affinis

作　　者：梁芳敏[1] 沈葵忠[1] 房桂干[1] 邓拥军[1] 李萍[1] 盘爱享[1,2] 

机构地区：[1]中国林业科学研究院林产化学工业研究所生物质化学利用国家工程实验室国家林业局林产化学工程重点开放性实验室江苏省生物质能源与材料重点实验室,江苏南京210042 [2]中国林业科学研究院林业新技术研究所,北京100091

出　　处：《造纸科学与技术》2011年第3期6-9,共4页Paper Science & Technology

基　　金："十一五"国家科技支撑计划专题项目(2006BAD19B0705);中央级公益性科研院所基本科研业务专项资金(CAFINT2009K01)

摘　　要：本文重点探讨了不同化学预处理温度对慈竹化机浆漂白性能的影响,并比较了慈竹与杞木、杉木和桑枝全杆化机浆的漂白性能差异。分别在130℃、30min和75℃、10min采用氢氧化钠、碱性亚硫酸钠、碱性过氧化氢等三种化学预处理条件,对慈竹原料进行了化学预处理,并进行了单段和两段过氧化氢漂白实验。与130℃高温化学预处理比较,75℃的低温化学预处理制备的化机浆,具有较高的浆料原始白度及漂白后白度。使用1.0%NaOH和2%Na2SiO3在75℃对慈竹进行化学预处理,其浆料经单段10%H2O2漂白后,白度可达到67%ISO。两段过氧化氢漂白和单段过氧化氢漂白具有相近的漂白浆白度。Bleaching properties of chemimechanical pulps from a bamboo species Neosinocalamus affinis（Rendle） Keng f.were investigated and compared with those from Alnus Gremastogyne,China fir and mulberry.Bamboo chips were chemical pretreated at various temperatures of 130℃,75℃ by using caustic soda process,alkaline sulfite process and hydrogen peroxide process,respectively.Single-stage and two-stage hydrogen peroxide bleaching experiments were conducted.The brightness for the pulps obtained at the impregnation temperature of 75℃ is higher than that at 130℃.By using the impregnation conditions of 1% NaOH and 2% Na2SiO3 at 75℃,bleached pulps achieve a brightness of more than 67% ISO by using 10% hydrogen peroxide single-stage bleaching.Two-stage bleaching responses for bamboo chemimechanical pulps are the same as that of single-stage bleaching.

关 键 词：竹材 化学机械浆 过氧化氢漂白 预处理温度 

分 类 号：TS745[轻工技术与工程—制浆造纸工程]