管束排列方式及管间距对水平管外液体成膜情况的影响分析  

Influential analysis of tube arrangement and tube spacing on film distributions

作　　者：邱庆刚[1] 陈金波[1] 

机构地区：[1]大连理工大学能源与动力学院,辽宁大连116024

出　　处：《热科学与技术》2011年第2期117-122,共6页Journal of Thermal Science and Technology

基　　金：中央高校基本科研业务费专项资金资助项目(DUT10ZD109);上海市科技攻关项目:海水淡化横管降膜蒸发器传热与流动关键技术试验项目

摘　　要：针对水平管降膜蒸发器管外液体的成膜情况,采用数值模拟方法,分析了管束排列方式及管间距等结构参数对水平管外液体成膜情况的影响。结果表明:管束布置方式、管间距对顶排管的影响不大,对于顶排管以下的管排来说,叉排方式时的液膜厚度要明显小于顺排方式的液膜厚度;随着管间距的增大,第二根管壁上的液膜厚度逐渐减小。Simulation method is adapted to predict the film characteristic outside the tubes in horizontal-tube falling film evaporator using FLUENT software.The effects of tube arrangements,tube spacing on the film thickness are presented.Numerical simulation results show that tube arrangement and tube spacing have little effect on the top tube,but for the tube below the top tube,the film thickness of staggered mode is significantly less than that of aligned mode.In addition,the film thickness of the tube in the second row reduced with the increase of tube spacing.

关 键 词：水平管降膜蒸发器 液膜分布 结构参数 数值模拟 

分 类 号：P747[天文地球—海洋科学]