乳化沥青厂拌冷再生混合料的加热碾压方法  

Method for Heating and Rolling Cold Plant-mixed Recycled Asphalt Mixtures with Emulsion Asphalt

作　　者：潘勇 葛折圣[2] 胡晓倩[2] 黄明波[2] 

机构地区：[1]深圳市龙岗区建筑工务局,深圳518172 [2]华南理工大学,广州510641

出　　处：《科学技术与工程》2011年第20期4924-4926,共3页Science Technology and Engineering

摘　　要：在常温下拌合和摊铺乳化沥青厂拌冷再生沥青混合料;然后,采用红外线或微波辐射加热摊铺后的再生沥青混合料,使底层混合料的加热温度为140℃～160℃,表层混合料的加热温度为150℃～170℃;最后,采用双钢轮压路机和轮胎压路机碾压加热后的沥青混合料至95%～100%的压实度。加热碾压工艺使得冷再生混合料中旧沥青和新添加的沥青加热融化后,在碾压过程中共同渗透、扩散到矿料表面,在矿料颗粒之间起黏结作用,提高了再生混合料的黏结强度,回收混合料中的旧沥青得以充分利用。具有广泛的应用前景。A method for heating and rolling cold plant-mixed recycled asphalt mixtures with emulsion asphalt was put up,which comprises the following steps： mixing and paving the cold plant-mixed recycled asphalt mixtures with emulsion asphalt;heating the paved recycled asphalt mixtures with infrared rays or microwave radiation so that the heating temperature of the mixture on the bottom layer is（140—160） ℃,and the heating temperature of the mixture on the surface layer is（150—170） ℃;and rolling the heated asphalt mixtures by using a double-steel-wheel roller and a pneumatic tyre roller until the degree of compaction reaches（95—100） %.By utilizing the heating and rolling process,after becoming molten,the old asphalt in the cold recycled asphalt mixtures and the newly added asphalt together infiltrate and diffuse into the surface of mineral aggregates in the rolling process and perform a cohesive action among the mineral aggregate granules,thereby enhancing the cohesive strength of the recycled asphalt mixture and fully utilizing the old asphalt in the recycled mixture.Its application prospect is much wider.

关 键 词：路面工程 沥青混合料 冷再生 加热 碾压 

分 类 号：U416.26[交通运输工程—道路与铁道工程]