Efficient multi-level fault simulation of HW/SW systems for structural faults  

作　　者：BARANOWSKI Rafal DI CARLO Stefano HATAMI Nadereh IMHOF Michael E. KOCHTE Michael A. PRINETTO Paolo WUNDERLICH Hans-Joachim ZOELLIN Christian G. 

机构地区：[1]University of Stuttgart,Institute of Computer Architecture and Computer Engineering [2]Politecnico di Torino,Dipartimento di Automatica e Informatica

出　　处：《Science China(Information Sciences)》2011年第9期1784-1796,共13页中国科学（信息科学）（英文版）

摘　　要：In recent technology nodes, reliability is increasingly considered a part of the standard design flow to be taken into account at all levels of embedded systems design. While traditional fault simulation techniques based on low-level models at gate- and register transfer-level offer high accuracy, they are too inefficient to properly cope with the complexity of modern embedded systems. Moreover, they do not allow for early exploration of design alternatives when a detailed model of the whole system is not yet available, which is highly required to increase the efficiency and quality of the design flow. Multi-level models that combine the simulation efficiency of high abstraction models with the accuracy of low-level models are therefore essential to efficiently evaluate the impact of physical defects on the system. This paper proposes a methodology to efficiently implement concurrent multi-level fault simulation across gate- and transaction-level models in an integrated simulation environment. It leverages state-of-the-art techniques for efficient fault simulation of structural faults together with transaction-level modeling. This combination of different models allows to accurately evaluate the impact of faults on the entire hardware/software system while keeping the computational effort low. Moreover, since only selected portions of the system require low-level models, early exploration of different design alternatives is efficiently supported. Experimental results obtained from three case studies are presented to demonstrate the high accuracy of the proposed method when compared with a standard gate/RT mixed-level approach and the strong improvement of simulation time which is reduced by four orders of magnitude in average.In recent technology nodes, reliability is increasingly considered a part of the standard design flow to be taken into account at all levels of embedded systems design. While traditional fault simulation techniques based on low-level models at gate- and register transfer-level offer high accuracy, they are too inefficient to properly cope with the complexity of modern embedded systems. Moreover, they do not allow for early exploration of design alternatives when a detailed model of the whole system is not yet available, which is highly required to increase the efficiency and quality of the design flow. Multi-level models that combine the simulation efficiency of high abstraction models with the accuracy of low-level models are therefore essential to efficiently evaluate the impact of physical defects on the system. This paper proposes a methodology to efficiently implement concurrent multi-level fault simulation across gate- and transaction-level models in an integrated simulation environment. It leverages state-of-the-art techniques for efficient fault simulation of structural faults together with transaction-level modeling. This combination of different models allows to accurately evaluate the impact of faults on the entire hardware/software system while keeping the computational effort low. Moreover, since only selected portions of the system require low-level models, early exploration of different design alternatives is efficiently supported. Experimental results obtained from three case studies are presented to demonstrate the high accuracy of the proposed method when compared with a standard gate/RT mixed-level approach and the strong improvement of simulation time which is reduced by four orders of magnitude in average.

关 键 词：fault simulation MULTI-LEVEL transaction-level modeling 

分 类 号：TP368.1[自动化与计算机技术—计算机系统结构]