检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:赵莉[1] 李笃信[1] 李昆[1] 杨忠臣[1] 张起[1] 徐东
机构地区:[1]中南大学粉末冶金国家重点实验室,湖南长沙410083 [2]深圳市汤普森科技有限公司,广东深圳518000
出 处:《粉末冶金工业》2011年第4期42-48,共7页Powder Metallurgy Industry
基 金:研究生学位论文创新项目4101-713360010
摘 要:采用粉末冶金工艺制备纯铁磁粉芯,研究了粘结剂含量、组成对磁粉芯综合性能的影响。结果表明,粘结剂含量为2.7%~3.6%,无机与有机粘结剂组成为3∶2~3∶1时,粘结剂的包覆效果较好,样品的力学性能得到较大改善,抗压强度达到了480 MPa;粘结剂含量为2.8%~3.5%,无机与有机粘结剂组成为2∶1时,磁粉芯磁性能较好,综合性能较佳。Pure iron powder cores were fabricated by powder metallurgy technique. Influence of the content and composition of binders on comprehensive performance of the material was researched. Result shows that the mechanical properties of samples are greatly improved and the compressive strength achieves 480 MPa when the total content of binders is 2.7%- 3.6% ,inorganic and organic ratio are 3 : 2-3 : 1 ,as binder coating get the best effect. Magnetic properties and comprehensive performance of magnetic cores are the best when total content of binders is 2.8%-3.5% ,inorganic and organic ratio is 2: 1.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28