检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:何洪涛[1,2] 朱伟[1,3] 张春雷[4] 王亮[1,5]
机构地区:[1]河海大学岩土工程科学研究所,南京210098 [2]中交第四航务工程勘察设计院有限公司,广州510230 [3]河海大学水资源高效利用与工程安全国家工程研究中心,南京210098 [4]河海大学环境学院,南京210098 [5]国家海洋局南海海洋工程勘察与环境研究院,广州510300
出 处:《岩土力学》2011年第8期2371-2378,共8页Rock and Soil Mechanics
基 金:国家自然科学基金项目资助(No.50979028);水利部公益性行业科研专项经费项目资助(No.200801065);海洋公益性行业科研专项经费项目资助(No.201105024)
摘 要:悬浮泥沙到沉积土的形成过程非常复杂,涉及到泥沙的沉降和土的自重固结。物理模型试验需要实测含水率、密度、颗粒分布、超孔隙水应力和总应力,但目前尚无简单可行的方法。提出了一种改进的室内试验方法,通过与国内外现有试验方法相对比,改进后的方法不仅可以得到泥沙在沉积过程中的泥面下沉变化、含水率(密度)分布、超孔压消散剖面,而且还能得到沉积物在不同高度和时间的颗粒分布变化等性质。通过多个试验实测及一致性测试表明,实测数据合理、可信,一致性检验误差较小,验证了此方法的可行性。The soil bed formation is a complex process which involves sedimentation and dead-weight consolidation. However, there isn't a simple and feasible method for measuring the water content, density, grain size, pore water pressure and total stress during its physical model test now. An improved laboratory testing method has been carried out. Compared with the available testing methods, the sttrface settlement, water content (density) distribution, dissipation profiles of excess pore water pressure, and grain size distribution variation of deposition at different depths and times in the process can be obtained by using the improved method. The experimental results show that the measured data are reasonable; and error of consistency test is small; and the improved laboratory testing method is feasible.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.80