低功率抽运光纤参量振荡器的时钟提取抖动性能  

Jitter Performance of Clock Signal Extracted by Fiber Optical Parametric Oscillator with Low Power Pump

作　　者：罗特[1] 武保剑[1] 文峰[1] 

机构地区：[1]电子科技大学宽带光纤传输与通信网技术教育部重点实验室,四川成都611731

出　　处：《中国激光》2011年第8期150-154,共5页Chinese Journal of Lasers

基　　金：国家973计划(2011CB301703);国家863计划(2009AA01Z216);新世纪优秀人才支持计划(NCET-2008)资助课题

摘　　要：采用两次光调制技术将非归零(NRZ)码数据转换成归零(RZ)码光信号后,利用光纤参量振荡器(FOPO)结构实现了较低光功率抽运下的参量波长转换和时钟提取功能。实验表明,对于波长转换间隔为1.6nm的10Gbit/s时钟提取,优化的输入抽运光功率范围是8～14dBm;当输入信号的幅度抖动和相位抖动分别大于2.28mV和3.5ps时,该时钟提取系统可实现抖动抑制功能,其输入/输出抖动转移曲线斜率约为0.29和0.16。An optical return-to-zero （RZ） signal is generated from non-return-to-zero （NRZ） signal by means of twostage optical modulation technique, and then is launched into the fiber parametric oscillator under low power pump for parametric wavelength conversion and clock extraction. Experiments show that, for 10 Gbit/s clock extraction with 1.6 nm-interval wavelength conversion, the optimized input pump power is in the range of 8- 14 dBm, the jitter suppression function can be implemented for the input signal with the amplitude and phase jitters of less than 2.28 mV and 3.5 ps, and the slopes of the corresponding input/output transfer curves are about 0.29 and 0.16, respectively.

关 键 词：光通信 光时钟提取 光纤参量振荡器 抖动性能 

分 类 号：TN253[电子电信—物理电子学] O437.4[机械工程—光学工程]