低碳微合金钢中Ti_xO--MnS型复合夹杂对焊接热影响区微观组织相变的影响  

Effects of Ti_xO-MnS complex inclusions on the microstructure phase transformation of heat affected zone in the welding of low carbon microalloyed steels

作　　者：王学敏[1] 舒玮[1] 郑超超[1] 张小帆[1] 贺信莱[1] 

机构地区：[1]北京科技大学材料科学与工程学院,北京100083

出　　处：《北京科技大学学报》2011年第8期958-964,共7页Journal of University of Science and Technology Beijing

基　　金：国家高技术研究发展计划资助项目(2008AA03Z501)

摘　　要：对比分析了两种低碳微合金钢中夹杂物对焊接热影响区组织相变的影响.对实验钢中夹杂物的分布和尺寸进行观察并在透射电镜下分析了夹杂物的选区衍射斑图样.采用热膨胀法结合金相分析建立了实验钢的连续冷却转变曲线(CCT曲线)和等温转变曲线(TTT曲线).研究发现,Ti脱氧钢中夹杂物以尺寸小于3μm的TixO--MnS型球状复合夹杂为主,其中TixO核心有两种类型(Ti2O3和Ti3O5).这类夹杂物具有诱导晶内针状铁素体形核的能力,针状铁素体优先在TixO--MnS型复合夹杂界面上形核,从而导致Ti脱氧钢相对于Al脱氧钢的贝氏体相变开始温度升高,相变时间也明显提前.The effects of inclusions in two kinds of low carbon micro-alloy steels on the phase transformation of welding heat affected zone were analyzed and compared.Inclusion distribution and size were observed and the selected area diffraction patterns（SADP） of inclusions were analyzed by transmission electron microscopy（TEM）.The continuous cooling transformation curves（CCT） and isothermal cooling transformation curves（TTT） of the test steels were built by thermal expansion method and metallographic analysis.It is shown that the main inclusions in Ti-deoxidized steel are globular TixO-MnS compounds with the size smaller than 3μm,and the TixO cores have two types,Ti2O3 and Ti3O5.These inclusions have the effect of inducing the nucleation of intragranular acicular ferrite.The acicular ferrite prefers to nucleate on the surface of TixO-MnS compounds in Ti-deoxidized steel,therefore,compared with that in Al-deoxidized steel,the bainite transformation temperature is increased and the transformation time is advanced obviously.

关 键 词：低碳微合金钢 氧化物夹杂 针状铁素体 相变 焊接 热影响区 

分 类 号：TG142.1[一般工业技术—材料科学与工程]