环氧树脂生产废水常温常压下催化氧化处理方法研究  

Study on Catalyzing and Oxidizing Wastewater from Production of Epoxy Resin under Normal Temperature and Pressure

作　　者：郑燕 徐江坤 杜祥君 

机构地区：[1]南京博环环保有限公司,江苏南京210052

出　　处：《环境监控与预警》2011年第4期51-53,共3页Environmental Monitoring and Forewarning

摘　　要：采用常温常压催化氧化工艺处理环氧树脂生产废水,通过实验发现,采用南京博环环保有限公司开发的负载型催化剂可以获得较好的效果。在常温常压,进水pH为3.5~5.5,氧化时间为0.5 h的条件下,COD的去除率可达到85%。The catalytic oxidation treatment of the wastewater from production of epoxy resin under normal temperature and pressure is studied.Using the carrying-catalyst developed by Nanjing Grand Environment Protection Co.,Ltd and adjusting the pH of wastewater between 3.5～5.5,the removal efficiency of the COD could reach 85% after 0.5 hours＇ reaction under normal temperature and pressure.

关 键 词：环氧树脂生产废水 常温常压催化氧化 负载型催化剂 

分 类 号：X703[环境科学与工程—环境工程]