数控线切割工作液对铝件腐蚀原因的探索  

Probe into the Cauterization Reason of Numerical Control Wire Electrical-discharge Dielectric on Aluminum Components

作　　者：陈平[1] 

机构地区：[1]中国电子科技集团公司第三十八研究所,安徽合肥230088

出　　处：《电加工与模具》2011年第4期46-47,共2页Electromachining & Mould

摘　　要：针对数控线切割机床在切割某些大型铝件时,表面会产生团状斑点的原因进行了分析,找出解决该问题的最佳方案,并通过实验进行了验证,证明了该方案的可行性。The paper analyzes the reasons of agglomerate cankerous speckles produced on surface of some large aluminum components when they are cut by numerical control wire electrical-discharge machine. The best solution to the issue has been found, and it has been demonstrated by test. The feasibility of the solution has also been proven by the practice.

关 键 词：工作液 铝件 腐蚀 

分 类 号：TG661[金属学及工艺—金属切削加工及机床]