检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:姚高辉[1] 吴爱祥[1] 胡凯建[1] 张敏杰[1]
机构地区:[1]北京科技大学土木与环境工程学院,北京100083
出 处:《矿冶工程》2011年第4期1-4,共4页Mining and Metallurgical Engineering
基 金:国家自然科学基金重点项目(50934002)
摘 要:为了探寻影响浸堆渗透性的重要因素,对羊拉铜矿堆浸进行了一系列实验研究。采用变水头渗透实验的方法,系统研究了不同矿石粒度及不同压实度条件下矿样渗透系数的变化规律。通过硫酸浸出实验证实了堆场矿样不同粒径组合时渗透系数随浸出时间增加呈减小趋势。实验结果表明,水洗入堆矿的级配特征优于原矿,其渗透系数也大幅度提高。随着压实度的增加,样品的渗透系数急剧降低。化学堵塞对浸堆渗透性影响较大,必须采用添加化学剂来降低化学堵塞的可能性。Several experimental researches were carried out in order to find important factors influencing permeability coefficient of a heap site.Variable head permeability test was conducted to study the variation in permeability coefficient of samples with different ore size and compaction degree.A sulfate leaching test indicated that permeability coefficient of samples with different particle size decreased with an increase in leaching time.Test results showed washed ore is better than the raw ore in terms of grading features and its permeability coefficient was enhanced substantially,but was rapidly reduced with an increase in compaction degree.Considering the greater impact of chemical blockage on heap permeability,chemical agents must be added to reduce such impact.
关 键 词:堆浸 氧化铜矿 级配特征 渗透系数 矿石粒度 压实度
分 类 号:TF803.21[冶金工程—有色金属冶金]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222