检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]山西省水土保持监测中心,太原030002 [2]中国石油天然气股份有限公司西气东输管道分公司,上海200122
出 处:《水土保持研究》2011年第4期273-276,共4页Research of Soil and Water Conservation
基 金:山西省水利厅资助项目(晋坝科070301)
摘 要:稳定性分析是边坡工程一项重要的工作,目前在工程设计中常用的边坡稳定分析方法为安全系数法,它是经过长期工程实践证明的一种有效设计方法。由于现阶段只有理论上计算边坡安全系数的公式,并不能直观感性的认识,不便于工程实践上应用。针对影响边坡稳定性的主要参数,采用极限平衡原理、强度折减法对土的抗剪强度指标粘聚力c和内摩擦角φ,边坡的坡角α和坡高H进行分析,通过不断改变单一变量的值,得出其与边坡安全系数的关系,并采用软件分析拟合出公式,从而得出简单可行的判断边坡安全系数的方法。Slope stability analysis is an important work project,now commonly used in engineering analysis of slope stability safety factor method,which is the result of long-term project proved an effective design method.Because at this stage,only the theoretical slope safety factor calculation formula,and not intuitive perceptual knowledge,engineering practice is not easy application.In this paper,the main parameters affecting slope stability,using the limit equilibrium principle,strength reduction of soil shear strength parameters c and the slope of the slope angle and slope height H analysis,by changing a single variable,was out its relationship with the slope safety factor,and using software to analyze the fitting formula to arrive at a simple and feasible method to determine the slope safety factor.
分 类 号:TU4[建筑科学—土工工程] P642.22[天文地球—工程地质学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222